Conductive?floor?wax?P1108

Please contact (020)38744012

This product disspates accumulated static on surface efficiently, protects electrical parts from ageing and keeps surface the clean, shine-looking. Good for use in the areas require static cotrol, such as micro-electronic factory, telecommunication equipments, electronical control room and sensitive medical engineering rooms.

Production description

Surface resistance: 10⁴ -10⁶ Ω Volumn resistance: 10⁴ -10⁶ Ω pH: 8.0-9.0

Electrostatic attenuation: <0.2s Electrification Voltage: <10V Solid content: 20 ±0.5%

Consumption: 100㎡/Gallon (for two layers)

Packing: 1 Gallon/Bottle, 4 Bottles/Box, 5 Gallons/Barrel

Treatment

1. Remove original layer. Wash suraface with water and leave to dry.

2. Spread the product evenly on surface by mopping. Wait for 30-60 minutes. When the surface is dry, apply second layer. Could apply multiple layers when needed. And please do not put used product back into container.

Attention

1.Use in good-ventilated area. If contact with eyes, wash with plenty of water immediately.

2.Go to see a doctor when needed. Please do not pour the used productback into container.

3.Seal the container when not using, and keep out of reach of children. Store under temperature higher than 0℃. The surface treated by this product could not clean with water, may use Polyforte Anti-static cleanser for daily maintenance.